|
MARK-603
Conductivity meter Is a portable meter for measuring conductivity (absolute and adjusted to 25°C),
salinity and temperature of water, including low-level conductivity in ultrapure water.
Warranty 12 months
|
Basic kit:
- Converting unit
- Sensor CS-015 or CS-15
- Flow-through chamber
- Battery type AA – 2 pcs.
- Operation manual
Optionally:
- Sensor CS-015 or CS-15
- Ion-exchange column IOC603
- Bearing panel BP603
- Power supply unit
- AA rechargeable batteries set
IP65
Compact waterproof handheld meter allows use in dirty and wet environment.
Dual automatic temperature compensation for high purity water,
selectable linear coefficient of temperature compensation
Stainless steel flow-dip sensor requires no calibration
Scratchpad
Non-volatile memory up to 100 data points.
Introspection system
Ion-exchange column with a switch of sample current
USB port and related software
The ability to create and manage archive data on a PC.
Graphic LCD display with backlight
Easy input of all parameters by keypad.
Low power consumption
Battery lifespan up to 600 hours of work.
|
|
Measuring range |
Resolution |
Accuracy |
|---|---|---|---|
|
Conductivity, µS/cm |
0-20001 0-200002 |
0,001 |
±(0,003+1,5% of measured value) ±(0,05+1,5% of measured value) |
|
Salinity, mg/L |
0-10001 0-100002 |
0,001 |
±(0,004+0,02*С) ±(0,06+0,02*С) |
|
Temperature, °С |
0-75* |
0,1 |
±0,3 |
|
|
*automatic temperature compensation range, ¹ with sensor CS-015, ² with sensor CS-15
|
||
|
|
Converting unit |
Sensor CS-015 |
Sensor CS-15 |
|
Dimensions, mm |
65*130*28 |
Ø15*130 |
Ø15*160 |
|
Weight, g |
120 |
80 |
110 |
|
|
|||
|
Port |
USB |
||
|
Power supply |
battery type AA – 2 pcs. | ||
Environment requirements
|
Temperature, °С |
0-75 |
|
Flow rate of water running through the chamber, dm³/min |
0,1-1 |
